Propulsion Technology Archives | Page 8 of 9 | Munitions Safety Information Analysis Center

L-051 Mitigation Methods for Munitions (M3)

November 1998

Rodrigue Boulay (Mitigation Methods) , NIMIC Staff

O-044(Rev) Can Insensitive Munitions & Hazard Classification Testing be Harmonized?

November 1998

Rodrigue Boulay (Mitigation Methods), Patrick Touzé (Detonics and Terminal Ballistics)

L-047 IM TESTING Volume V: A Synopsis of the NIMIC Workshops on IM Testing held 20-23 May 1998 at NATO HQ, Brussels, Belgium and 17-21 November 1997 at DSTO, Adelaide, Australia

July 1998

NIMIC Staff

O-042 A Synopsis of the NIMIC Workshop on Insensitive Munitions (IM) Testing

July 1998

Dr Michael W. Sharp (Energetic Materials) , Jason deW FitzGerald-Smith (Warhead Design), Patrick Touzé (Detonics and Terminal Ballistics), Rodrigue Boulay (Mitigation Methods)

O-043 The Safety Assessment of Insensitive Munitions

July 1998

Rodrigue Boulay (Mitigation Methods)

L-045 IM TESTING Volume IV: Group Reports of Phase II of the NIMIC IM Testing Workshop held 17-21 November 1997 at DSTO, Adelaide, Australia

June 1998

NIMIC Staff

L-044 IM TESTING Volume III: Presentations made at Phase II of the NIMIC IM Testing Workshop held 17-21 November 1997 at DSTO, Adelaide, Australia

January 1998

NIMIC Staff

L-043 Glossary of Terms (Rev.1) Prepared for Phase II of the NIMIC Workshop on IM Testing

November 1997

Rodrigue Boulay (Mitigation Methods)

O-033 Workshop on Insensitive Munitions Testing - Report on Phase 1

November 1997

Rodrigue Boulay (Mitigation Methods), Jason deW FitzGerald-Smith (Warhead Design), Benjamin B. Stokes III (Propulsion Design), Andrew J. Sanderson (Energetic Materials) , Patrick Touzé (Detonics and Terminal Ballistics)

O-034 Summary of 1997 NIMIC Workshop on Testing of Fast Heating, Slow Heating and Sympathetic Reactions: US Perspectives

November 1997

Benjamin B. Stokes III (Propulsion Design), Andrew J. Sanderson (Energetic Materials) , Jason deW FitzGerald-Smith (Warhead Design), Rodrigue Boulay (Mitigation Methods), Patrick Touzé (Detonics and Terminal Ballistics)

O-036 Best Practices for IM Testing

November 1997

Benjamin B. Stokes III (Propulsion Design)

O-039 Some questions about Insensitive Munitions Definitions Assessment and Testing to Impact Stimuli

November 1997

Patrick Touzé (Detonics and Terminal Ballistics), Rodrigue Boulay (Mitigation Methods), Adrian O'Donoghue (Royal Australian Navy, temporarily attached to NIMIC)

L-042 Comparison of Existing Test Procedures for Bullet, Fragment and Shaped Charge Jet Impact

October 1997

Rodrigue Boulay (Mitigation Methods)

O-032 NIMIC Insensitive Munitions Award

September 1997

NIMIC Staff

L-040 IM TESTING Volume I: Presentations made at Phase I of the NIMIC IM Testing Workshop held 20-23 May 1997 at the NATO HQ, Brussels, Belgium

June 1997

Ian Barnes (UK MoD) , NIMIC Staff

L-036v2 Cookoff and XDT Mechanisms Workshop Proceedings, Vol. 1 (Rev.) - Presentations; Vol. 2 - Group Discussions, Conclusions and Annexes

April 1997

Benjamin B. Stokes III (Propulsion Design), Andrew Sanderson (Energetic Materials) , Patrick Kernen (Explosive Effects)

L-038 NIMIC Report on the Meeting to Discuss Thermal Threat-Stimuli and their Effects

February 1997

Benjamin B. Stokes III (Propulsion Design), Jason deW FitzGerald-Smith (Warhead Design)

O-030 NIMIC: From a Center of IM Information to its Involvement in Weapons Development

December 1996

Benjamin B. Stokes III (Propulsion Design), Andrew J. Sanderson (Energetic Materials) , Jason deW FitzGerald-Smith (Warhead Design), Patrick Kernen (Explosive Effects), Patrick Touzé (Detonics and Terminal Ballistics)

L-036v1 Presentations of NIMIC 1996 Workshop on "Cookoff and XDT Mechanisms" - Vol. I (Revised) + Vol. II : Group Discussions Conclusions and Annexes

November 1996

Benjamin B. Stokes III (Propulsion Design), Patrick Kernen (Explosive Effects) , Andrew J. Sanderson (Energetic Materials)

L-034 Summary of 1996 NIMIC-KTA-4-20 Workshop on Cookoff and XDT Mechanisms

October 1996

Benjamin B. Stokes III (Propulsion Design) , Andrew Sanderson (Energetic Materials) , Patrick Kernen (Explosive Effects)